Customization: | Available |
---|---|
Warranty: | 1 Year |
Type: | Preparation Machinery |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Mechanical vapor compression MVR or MVC (Mechanical Vapor Compression) evaporator, the principle is to usethe secondary steam which is produced through compressing the steam by the steam compressor , secondary steam heat and temperature is increased by the compressor, steam compressed into the evaporator as the heat source, again makes the raw material liquid start evaporation, so there is no need to rely on external fresh steam, just need to rely on the evaporator system itself circulating to achieve the purpose of evaporation. Through the PLC control system, configuration software and engineering software to control the temperature, pressure, speed motor system, maintain stable, intelligent and efficient operation of the evaporator.
Performance characteristics:
1) No waste heat steam emissions, energy-saving effect is very significant, which is equivalent of 10 effect evaporator.
2) Using this technology can achieve to countercurrent washing of secondary steam, therefore the dry matter content in condensed water is far lower than the number of evaporator.
3)Using low temperature negative pressure evaporation (50-90 ºC), help to prevent the degeneration resulted from high temperature evaporation.
4)MVR evaporator is a substitute of traditional multi-effect falling-film evaporator, is based on single effect evaporator through the reuse of the secondary steam countercurrent washing and recompression. All material that applicable for single effect and multi-effect evaporator, are suitable for use in the MVR evaporator, technically have the substitutability. It has perfectcharacteristics of environmental protection and energy saving. Becauseof its significant energy-saving effect, MVR evaporator technology started rapid development in foreign countries at the beginning of 70's, now is widely used, which is used in industrial wastewater treatment and dairy, sugar, starch, alumina, papermaking, caprolactam, seawater desalination, coking plant (recovery of sulfur dioxide production sulfur ammonia), salt chemical industry, and other many production areas.
Technical parameters(evaporation according to the customer need to design)
Model |
BYMVR-0.5 |
BYMVR-1 |
BYMVR-1.5 |
BYMVR-2 |
BYMVR-5 |
BYMVR-10 |
BYMVR-15 |
Evaporation capacity |
500kg/Hr |
1000kg/Hr |
1500kg/Hr |
2000kg/Hr |
5000kg/Hr |
10000kg/Hr |
15000kg/Hr |
Inlet saturated steam capacity(kg/Hr) |
500 |
1000 |
1500 |
2000 |
5000 |
10000 |
15000 |
Inlet saturation temperature (c) |
55.295 |
71.631 |
82.109 |
90 |
90 |
90 |
90 |
Outlet temperature (c) |
12.590 |
14.145 |
15.185 |
16.000 |
16.000 |
16.000 |
16.000 |
Outlet the saturation temperature (c) |
67.885 |
85.776 |
97.294 |
106.000 |
106.000 |
106.000 |
106.000 |
Inlet saturation pressure kPa (A) |
15.975 |
33.441 |
51.567 |
70.117 |
70.117 |
70.117 |
70.117 |
Inlet saturation pressure kPa (A) |
28.432 |
59.596 |
91.921 |
125.029 |
125.029 |
125.029 |
125.029 |
Compression ratio |
1.780 |
1.782 |
1.783 |
1.783 |
1.783 |
1.783 |
1.783 |
Motor power (kw) |
40 |
55 |
75 |
95 |
132 |
550 |
640 |
Outlet volume flow (m^3/s)
|
0.795 |
0.7971 |
0.7985 |
0.7997 |
0.7997 |
0.7997 |
0.7997 |
22.736 |
22.795 |
22.837 |
22.87 |
22.87 |
22.87 |
22.87 |
|
4X4X10 |
6X4.5X12 |
8X5.5X14 |
8X5.5X14 |
9.5X6X15 |
12.6X6.5X17 |
13.6X7X17 |
1 ) Q: How can we visit your factory?
A: If you come from abroad, air to shanghai airport, then we can pick you up at airport.
2) Q: How do you ensure the quality of your products?
A: Our Company is a state owned enterprise with more than 16 years experience , strict operation policy is performed, advanced processing machines guarangtee the precision of all components, workers with operation license, parts get multiprocessing, transmission& electrical parts are of international famous brand. Series of test and inspection are done in the whole producing state.
3) Q: What payment methods your company accept?
A: We accept most of the payment methods , but mainly accept T/T, L/C at sight .
4) Q: How long is the warranty time for your products?
A: Our officially promised warranty time is 12 months after commissioning .
5) Q: I am new in this field,can you supply us turnkey services?
A: YES.We can supply all the system including Market Analysis/Product Analysis/Location Choice/Processing Flow Design/Equipment Layout Design/Building Design direction/Equipment mode selection/Equipment Manufacturing/Equipment Mounting/Equipment Debugging/Worker Training.
6) Q: What ' s the shipment terms and delivery time of your company?
A: Well, the delivery time depend on the quantity of your order. Usually is 20 days . For some customized machine 30 days is necessary.
7) Q: Can you supply OEM services?
A: Yes,we have our R&D team,and we have more than 400 workers with workshop area 75000 square meters.
8) Q: Do you give any Discount?
A: I will surely try my best to help you get those by the best price and good service at the same time.