New Design stainless steel PLC control system milk vacuum evaporator

• Type: Preparation Machinery
• Finished Dosage Form: Tablet
• Precision: High Precision
• Certification: CE, GMP, ISO
• Voltage: 380V
• Computerized: Computerized
• Customized: Customized
• Condition: New
• Warranty: 1 Year
• After-sales Service: One year
• Transport Package: Container
• Specification: customized
• Trademark: Beyond
• Origin: China
• HS Code: 8419899010
• Production Capacity: 200PCS/M

Product Description

New Design stainless steel PLC control system milk vacuum evaporator

WZY Single-effect Evaporator

The external circulating single-function evaporator is made up of heater, evaporator, separator, and so on, of which parts contacting with materials shall be made of stainless steel. The equipment applies for evaporation and condensation of liquid materials in the industries such as pharmacy, foodstuff, chemical, light industry and so on. The equipment has the characteristics of short time for condensation, fast evaporation and preventing the thermal sensitive materials from been damaged preferably.

 

 

There are three kinds of types for the series single-function evaporator:

·Conventional type WZY, applies for water solution evaporation.

 

 

·Alcohol recycling type WZYH, applies for alcohol solution evaporation, which has bigger condensing and cooling area to make sure alcohol recycling. The recycling concentration can reach as much as 70~85º,  attrition rate of alcohol is less than 5%, and temperature after alcohol recycling is not more than 40ºC.

 

 

·WZYS paste obtained type, applies for single-function evaporation and obtaining the condensate paste. After normal evaporating of single-function, shut down the valves of circulation tube and the one of connecting nozzle between heating and evaporating chamber, in order to make feed liquid enter into the evaporating chamber on the whole and heat by the sheaf in the evaporating chamber directly, then condense with decompression in the normal pressure mode, for the purpose of enhancing the concentration rate of material up to the range 1.35-1.45.

 

 

Performance characteristics:

1)  No waste heat steam emissions, energy-saving effect is very significant, which is equivalent of 10 effect evaporator.

2) Using this technology can achieve to countercurrent washing of secondary steam, therefore the dry matter content in condensed water is far lower than the number of evaporator.

3)Using low temperature negative pressure evaporation (50-90 ºC), help to prevent the degeneration resulted from high temperature evaporation.

4)MVR evaporator is a substitute of traditional multi-effect falling-film evaporator, is based on single effect evaporator through the reuse of the secondary steam countercurrent washing and recompression. All material that applicable for single effect and multi-effect evaporator, are suitable for use in the MVR evaporator, technically have the substitutability. It has perfectcharacteristics of environmental protection and energy saving. Becauseof its significant energy-saving effect, MVR evaporator technology started rapid development in foreign countries at the beginning of 70's, now is widely used, which is used in industrial wastewater treatment and dairy, sugar, starch, alumina, papermaking, caprolactam, seawater desalination, coking plant (recovery of sulfur dioxide production sulfur ammonia), salt chemical industry, and other many production areas.

 

Technical parameters(evaporation according to the customer need to design)

type Specification	WZYH-500	WZYH-1000	WZYH-1500	WZYH-2000
Steam consumption(kg/h)	500	1000	1500	2000
Evaporating capacity(kg/h)	500	1000	1500	2000
Recycling capacity of alcohol(kg/h)	300	600	900	1200
Water consumption(t/h)	6	10	15	20
Power consumption(kw)	5.5	7.5	9	11
Useful vacuum degree(MPa)	0.08	0.08	0.08	0.08
Steam pressure(MPa)	0.09	0.09	0.09	0.09
Specific weight of concentrated solution	Pipe inside 1.2 Jacket heating 1.45
Concentration of alcohol	70~80
Dimension(m)	2.5×1.3×2.8	3×1.4×3	3.3×1.4×3.5	2.5×1.3×2.8

 

 

Applicable range
Mechanical vapor compression MVR or MVC (Mechanical Vapor Compression) evaporator, the principle is to use the secondary steam which is produced through compressing the steam by the steam compressor , secondary steam heat and temperature is increased by the compressor, steam compressed into the evaporator as the heat source, again makes the raw material liquid start evaporation, so there is no need to rely on external fresh steam, just need to rely on the evaporator system itself circulating to achieve the purpose of evaporation. Through the PLC control system, configuration software and engineering software to control the temperature, pressure, speed motor system, maintain stable, intelligent and efficient operation of the evaporator.

Beyond provides manufacturing and installation services with a group of skilled colleagues who work closely with our supervisors and customers to be solution oriented.
By working with our highly skilled project team, we can cover the whole project stage, from conception, first draft to final implementation and commissioning. We provide complete turnkey solutions according to customers' requirements and are responsible for the relocation of technical devices.
Our workshop is a professional manufacturer of stainless steel parts, including:
Stainless steel tank
Piping system
Desiccation Room
evaporator
distributor
Filter housing
Various thin stainless steel structures
Various stainless steel structures such as cyclone separators, service platforms, external and internal fluidized beds
We have all the certificates required in the field of welding and testing, as well as the ability to provide pressure vessels.
Beyond is the preferred partner of customers. Customers have high demand, focus on quality, and need a strong partner who can provide a variety of stainless steel products.
 

Company Profile

 

 

 

 

 

Our Service

 

 

Trade shows

 

 

 

Certificate

 

 

 

Packaging & Shipping

 

 

 

FAQ

 

1 ) Q: How can we visit your factory?
A: If you come from abroad, air to shanghai airport, then we can pick you up at airport.

 

2) Q: How do you ensure the quality of your products?
A: Our Company is a state owned enterprise with more than 16 years experience , strict operation policy is performed, advanced processing machines guarangtee the precision of all components, workers with operation license, parts get multiprocessing, transmission& electrical parts are of international famous brand. Series of test and inspection are done in the whole producing state.

 

3) Q: What payment methods your company accept?
A: We accept most of the payment methods , but mainly accept T/T, L/C at sight .

 

4) Q: How long is the warranty time for your products?
A: Our officially promised warranty time is 12 months after commissioning .

 

5) Q: I am new in this field,can you supply us turnkey services?
A: YES.We can supply all the system including Market Analysis/Product Analysis/Location Choice/Processing Flow Design/Equipment Layout Design/Building Design direction/Equipment mode selection/Equipment Manufacturing/Equipment Mounting/Equipment Debugging/Worker Training.

 

6) Q: What ' s the shipment terms and delivery time of your company?
A: Well, the delivery time depend on the quantity of your order. Usually is 20 days . For some customized machine 30 days is necessary.

 

7) Q: Can you supply OEM services?
A: Yes,we have our R&D team,and we have more than 400 workers with workshop area 75000 square meters.

 

8) Q: Do you give any Discount?
A: I will surely try my best to help you get those by the best price and good service at the same time.