Specifications
The CIP system:
1. Made of stainless steel
2. Four tanks for cleaning solution
3. Mounted as a whole system
4. Easy to move
The CIP system is installed on a frame and supporter which is easy for transportation especially for exporting; The operating principle of the full auto CIP cleaning system means that the tank body, pipelines, pumps and all valves and also the whole processing line are cleaned on line no need to disconnect the pipes or the equipments, all cleanings are done at the closed circuit.
Main components:
CIP cleaning liquid storage tanks(include acid tank, alkali tank, hot water tank, clear water tank);
Two not big storage single layer tanks for concentrated acid and alkali.
CIP forward and return pumps.
Two diaphragm pumps for acid/alkali concentrate.
Heat exchanger(plate or tubular type)
One electrical appliance box
One set of controlling pipe and valve component.
One set of auto-performance components and parts and the electrical appliance material.
CIP cleaning liquid storage tank: 1000L-10000L.
According to the customers requirements, we can make the double circuit, three circuit, four circuit and so on, meanwhile we can make multi circuit operating at the same time.
The Heating way: Plate type, coil tube type, tubular type.
System control elements:
This system adopt the PLC program to control, with the colored touch --screen to operate and display the whole process flow and also the each controlling parameter. The temperature of the cleaning liquid can be installed. It can set the pH value, the cleaning time, cleaning sequence, and also the refluence pH value. With the system malfunction alarm device.
The operating principle of the system:
1. Auto-flow control for the cleaning solution
2. Automatically regulate the temperature of the cleaning liquid.
3. Auto-compensate for the inside tank liquid level.
4. Automatically-compensation for the acid and alkali concentration.
5. Auto transfer from one cleaning liquid to another.
6. System auto alarm-device
The main description for the CIP cleaning system are as follows:
The CIP Cleaning system is too carry out circulation cleaning under the condition that no need to open the equipment(tankpipepumpvalve etc. )and the whole producing line. The CIP system is controlled by Siemens PLC, full-auto controller. The plate-type heat exchanger will heat on line, The concentration test of acid alkali, the upper and lower liquid level of tank, control valve, all use imported products with high quality. The CIP system is full-auto operation control.
Tank size
|
300L-1000L
|
CIP tank type
|
Alcali tankacid tankhot waterclean water tankwater recycle tank
|
Cleaning recycles
|
Single circuitdouble circuitsthree circuitsfour circuits
|
Heating method
|
Coil pipes insideplate tubular
|
Automatic types and charastics
|
Full Automatic
|
1. flow rate auto control;
2. temperature auto control;
3. auto compensate the cip liquid level;
4. auto compensate the liquid concentrate;
5. cleaning liquids auto transfer;
6. auto alarm
|
Semi-auto control
|
1. temperature auto control
2. electrical control with manual operate the other matters.
|
Manual operation
|
1. manual operate on the cleaning process
|
Audited Supplier 
){kind=link}